Wire drawing process includes the use of metal, which reduces the cross-section after it goes through a series of dies. This is the type of forging process that is plastic, permanent change the metal shape.
If we dig deep into the process of wire drawing, it reduces the size of the rod of ferrous and no-ferrous to the finished sizes and also includes the superfine wire. This process includes a series of multiple single drawing machines. The type of dies like tungsten carbide, natural diamond, synthetic diamond, and its use depends upon the type of material that is being drawn. Normal wires, electrical wires, magnet wires, and overhead power conductor wires, telecommunication wires, musical strings or other roads; they all are produced with the wire drawing machines.
Use of high-quality lubricant, this makes the wire, completely immerse in the neat oil, or in the synthetic medium. Wire drawing lubricants manufacturer India avoids the use of emulsifying liquid lubricants and recommends the use of liquid wire lubricants.
The use of poor quality wiring may lead to unwanted breakage, this situation turns bad and you have to spend more money on its operating. But using high-quality lubricants you can reduce the chances of happening of these issues.
Here are given benefits of using high-quality lubricants-
Maintain the wire integrity
if you’re investing a good amount while choosing the wire lubricating material, this maintains the quality of the wire, alleviate the chances of its surface damage. If your wire has good quality lubricant you don’t have to invest extra money at the end, because of its excellent surface finishing.
Right wet drawing is required for wires
Not every wire drawing lubricant is suitable, so you ought to prefer lubricant material with high quality. Additives in the lubricant make the drawing process happen and enable the good surface finish. High-quality lubricant material has a good life span and efficient dye that allows the wire to maintain its functional life long-lasting.
Make the use of lubricants determined
There is a distinct process that requires the use of wire lubricants. you should remember wire may lose their quality if you use one product for a distinct process. Well, you will get water-soluble lubricants, neat oil and synthetics. So the use of the lubricant should be done according to their fate.
Reduces the wire lubrication
If the construction of the wire cannot be done properly with the quality material it is difficult to make them from friction. Quality material provides the lubrication in the core and inside the wire until the exterior surface.
No chances of corrosion
The combination approach with the lubricant, saturate the core of the wire. This is the reason why you should use the best and high-quality lubricating material for wires drawings because it gives protection against corrosion and keeps the wire safe.
These are the reasons why only quality lubricating material is necessary for the wire drawing. So invest smartly so that you don’t have to invest for the further cost.
