Grodal Form Super 110
is a high-performance, fully synthetic forming oil used in forming operation of Steel, Stainless steel. This product recommended for Punching, bending & stamping operations. It can be applied by spray equipment, drip oiler, roller or brush. Should be used in neat form.
Grodal Multicut AL 2000
It is a Chlorine, boron and Secondary amine free high quality micro emulsion water miscible metalworking fluid. Product is designed to form a translucent emulsion which is suitable for soft and hard water in a range of 15 – 400 ppm. Grodal Multicut AL 2000 is designed to minimize skin irritation and provide long operation life at the same time. Product is free of formaldehyde release agents (FAD). Grodal Multicut AL 2000 is suitable for modern Individual and centralized system where long service life, excellent machining performance, health and environmental concerns are important factors for increased productivity. Grodal Multicut AL 2000 is primarily intended for the machining of aluminium and aluminium alloys, copper, Brass and wide variety of ferrous alloys materials as well as multimetals.
Grodal ALSB 105 (ABR)
It is a solvent-based vanishing drawing stamping & blanking oil. This product leaves a slight film of oil with corrosion inhibition properties. It is having excellent water displacing characteristics. It is a low odour, colourless & free from sulphur and chlorine. Grodal ALSB 105(ABR) is recommended for tapping, fine blanking & stamping of ferrous and non-ferrous metals up to 1 mm, also stamping & blanking of aluminum air conditioning fins.
Grodal SYN CUT 1012
Chlorine-Free deep hole drilling oil. Low viscosity, low misting, ester base synthetic neat cutting oil. It is used for difficult and extremely difficult-to-machine/cutting operations on hard & very hard steel materials.
Grodal STAR CAST 500
Is a semi-synthetic soluble oil used for grinding and cutting operations of Cast Iron, carbon steel, alloy steel, copper & alloys. GRODAL STAR CAST 500 is easy to emulsify, making up easily highly stable micro-emulsions. It is ideal or working in centralized systems where excellent behavior against bacteria, an alga, etc. is required.
Grodal SYN CUT NF 1012
Chlorine-Free Broaching oil. Low viscosity, low misting, ester base synthetic neat cutting oil. It is used for difficult and extremely difficult-to-machine/cutting operations on hard & very hard steel materials.
Grodal Gun Drill SYN 15
It is low misting, synthetic neat cutting oil containing a high percentage of chlorine-free EP combination and high quality lubricity improvers.High performance gun drilling, broaching oil for difficult and extremely difficult-to-machine materials. Apart from broaching it is also recommended for other machining processes like deep hole drilling, reaming & tapping.
Grodal SYN CUT NF
Synthetic coolant – Nitrite free.
Grodal SOL 133
High lubricity semi synthetic metalworking fluid for machining and grinding.
Grodal Cutsol AA
Multipurpose Metalworking Fluid.
Grodal Cutsol Multicut SS 40
Semi synthetic metalworking fluid optimized for cutting operations
Grodal Hone 5
Neat Cutting Oil optimized for Honing operations.
Grodal DE 110
Drawing Oil with EP Additive.
Grodal ST CUT 102 N
Straight Cutting Oil
Grodal SYN CUT 32
Synthetic neat cutting Oil.
Grodal DE 35
Neat Cutting oil – Heavy Duty Drawing.
Grodal Multicut SS 4000
Semi-synthetic metalworking fluid for multipurpose use.
Grodal Cutsol A
Soluble cutting oil for all kind of machining operations.
Grodal Cutsol D
Soluble cutting oil for 200ppm hard water & general machine operations.
Grodal Cutsol AH
High performance soluble cutting oil.
Grodal Cutsol C
Cutting oil cum rust preventive concentrate.
Grodal Cutsol AM
Water soluble, milky appearance cutting oil for all kinds of machining operations.
Grodal Broach 1
Neat cutting oil for broaching application.
Grodal Syncut 1
Synthetic Coolant. Good surface finish.
Grodal Syncut 2
Green color, synthetic cutting coolant.
Grodal SS Cut 10
Semi-synthetic cutting oil for machining, grinding, etc. operations. Excellent surface finish.
Grodal SS Cut 10 (T)
Synthetic cutting oil for machining, grinding, etc. operations. Excellent surface finish.
Grodal SS Cut 20
Semi-synthetic cutting oil for excellent performance in CNC and VMC.
Grodal SS Cut 30
Low oil content semi synthetic cutting oil.
Grodal Star cast
Low oil concentration semi-synthetic cutting oil.
Tadal SOL 133
High lubricity metal working fluid mainly for brass.
Grodal Stcut Mill 22
GRODAL STCUT MILL 22 is a chlorine and zinc free neat cutting oil.
Grodal Stcut 10H
High performance, chlorine free neat cutting oil design for machining of hard steel.
Grodal Stcut GR 3
Neat cutting oil for granite machining.
Grodal Stcut DHD 15
Deep hole drilling cutting oil.
Grodal Stcut 13
Low viscosity neat cutting oil.
Grodal Stcut 15
Neat cutting oil for machining having sulphur additive.
Grodal Stcut 22
It is superior quality neat cutting oil having high oxidation stability. No excessive fumes.
Grodal ST Cut 22 H
Highly chlorinated neat cutting oil for machining of hard steel.
Grodal ST Cut 32
Superior quality neat cutting oil.
Grodal ST Cut 32K
Chlorine free neat cutting oil design for high performance.
Grodal Stcut 46
It is premium quality neat cutting oil having high oxidation stability. No excessive fumes.
Grodal Stcut 46(T)
It is premium quality neat cutting oil having high oxidation stability. No excessive fumes. Optimized for Turbine Base Stock
Grodal Stcut 46M
It is premium quality neat cutting oil having high oxidation stability. No excessive fumes.
Grodal ST Cut 68
Superior quality neat cutting oil.
Grodal ST Cut 100
Superior quality neat cutting oil.
Grodal ST Cut 204
Neat cutting thick oil for machining.
Grodal Stcut TDN 130
Highly chlorinated neat cutting oil for deep drawing of steel.
Grodal Form SS 1500
Is extremely high lubricity & surface finishing semi synthetic oil used in neat form for stampting,drawing operations of cast Iron, carbon steel, alloy steel, copper & alloys. Due to its soluble nature, components are easily washable in water.
Tag : Neat Cutting Oil, Cutting Fluid