by Groweladmin -

The Basics and Importance of industrial lubricants

One of the most imperative things an operator can do for his/her machinery is to make sure it is properly lubricated.

So, what a lubricant is and how does it affect operations when used correctly? This article will answer all the questions and more by covering the fundamentals of lubrication. It will be discussed how a lubricant works to remove friction, the physical and chemical attributes of the lubricant, and the many other characters of a lubricant.

by Groweladmin -

Top 3 Cost Management Tips for Chemical Companies

Since a decade, the chemical manufacturers in India have progressed from non-differentiated simple manufacturing of chemicals to an advanced version of the manufacturer of R&D concentrated chemicals. The Indian chemical industry primarily began with the basic manufacturing of chemicals from petrochemicals, fertilizers etc. which were of low differentiation, more volume and high barriers.

by Groweladmin -

How Do I Choose the Correct Marine Paint?

Marine paints are the paints which are basically used to paint or coat the exterior of any boat in order to enhance the vulnerability to water. These paints are the oil-based paints which create a long-lasting surface and the grease or dirt can be easily removed with just a few efforts. However, it requires a lot of time in drying up fully after getting coated. This paint helps the exterior boat from getting attached to the water living organisms such as algae, weeds, slime and many more. In the modern world, there are various categories of marine paints to choose from which can get confusing as to decide which paint to be used. The given below are some of the popular marine paints along with various considerations which can be kept in mind in order to decide which marine paints should be used in place of other:

by Groweladmin -

How to prevent ships corrosion by applying marine paints?

The peculiarity of ship paints is that these paints are specifically designed for painting sea, river ships, ships, yachts, barges. These coatings, due to their high resistance to water, have long served the purpose of protecting the hull of a ship from the aggressive influence of water, abrasives, wind, temperatures and ultraviolet raadiation.

by Groweladmin -

How can your industry benefit from industrial coating?

In many cases, repair and new construction of industrial floors, particularly when associated with change of use, require recovery of the concrete support to be covered and protected quickly. To say that coatings manufactured by the industrial coating manufacturers are highly useful for industries is an understatement, it means a lot to industrial productivity. Let us learn about some benefits.<!–more–>

by Groweladmin -

Wire and Rod Drawing Process for Steel

Wire drawing process for steel is used for the reduction of cross-section of the rod. It is a metal working process and is of industrial use. The basic process behind wire and rod drawing process is reduction of the cross section of the rod by pulling the wire through one or more drawing dies. As the wire is pulled through the draw dies it keeps on shaping itself and thus is drawn.

Drawing is a widely used process because of its unbeatable advantages over any other procedure. The advantages of wire and rod drawing of other applications are:

  1. Good surface finishing
  2. Adaptability to mass production
  3. Close dimensional control
  4. Improved dimensional properties
  5. Economical benefits

The process of drawing is as follows:

  • Preparation of the drawing material: It involves the processes of annealing, cleaning and pointing. Annealing increases the ductility of the material, cleaning prevents damage of the working surface and draw die while pointing involves reduction of diameter so that the material can be inserted into the draw die to start the process.

Sometimes lubrication of the material surface is done before the cleaning process begins.

This is the most important step of drawing and must be performed properly. The perfection of this step determines the perfection in the whole process.

  • The pointed end of the wire rounds is then gripped by the carriage jaws to initiate the drawing process. The wire passes through one or more drawing dies for the process. This process is undertaken by the automated machines and only require supervision. The supervision is not simple either, the operator has to check that the lubricants are present in the soap containers and that the wires are experiencing the least possible friction. The operator also has to check if the wire is round. The wire may change its shape during transitions from one draw die to the other.
  • Since the whole process is dependent upon pulling the wire through the drawing dies, both the wire and the drawing dies have a risk factor of wear and tear due to friction and heat formation. Even though the cleaning process attempts at preventing the damage, it is not enough. It requires the use of lubricant to eliminate the damage risk completely. Lubricants not only prevent the damage but also increase the efficiency and quality of the wire produced after drawing. Evidently, lubricants play a key role in wire and rod drawing of steel.
  • The wire drawing lubricants manufacturers in India manufacture the best lubricating wire drawing lubricants. Therefore, choosing the wire drawing lubricants is not a difficult task today. There are many varieties of lubricants as per requirement available in the market which are easily accessible. Customers can select the one that suits their requirement.

Tag : Tube drawing oil manufacturers in India , wire drawing continuous plating, drawing oil manufacturers in India

by Groweladmin -

Role of Solvents in Paints and Coatings

Solvents are one of the most widely used chemicals in Industrial manufacturing, cutting across sectors. Be it aviation, agro produce, food processing, pharmaceuticals, automobiles, Solvents are an inseparable part of modern day manufacturing. Solvents are added to numerous paints and coatings and according, to their type they serve a variety of different purposes. If you go to any paint manufacturer in India, you will see their dependence on a number of solvents ranging from Ethanol, to esters and other types. Industrial paint suppliers, also keep ample stock of solvents, as they are most often used in combination. If you are looking to for information about the role and function of solvents, we have come up with a guide that will tell you exactly that:

by Groweladmin -

THE IMPORTANCE OF PROPER GREASE AND LUBRICATION

With emerging activities of industries, especially the industrial equipments working continuously need to be highly resistant and durable. Their reliability and durability solely depend on the function of the industrial designs involved in the production activities. Be it the ball screws or the rollers they consistently have to undergo and take loads of applications. In most of the cases, the industrial designs tend to give up due to factors like erosion, corrosion, rusting, pitting and also skewing. Therefore, in order to prevent such factors proper greasing and lubrication is vital so as to increase the reliability of that equipment. There are many industrial lubricants suppliers who offer high quality products for ensuring long life of the machine.

by Groweladmin -

THE IMPORTANCE OF PIPELINE COATING IN CORROSION PREVENTION

Corrosion is a process which occurs naturally, wherein the process converts any metal with a chemically oriented form such as oxidization. There is a gradual destruction of the metal with chemical reactions with the environment. Corrosion in pipes, simply means the metal due to contact with the external environment starts dissolving especially when in contact with water, causing initial rusting followed by corrosion. Corrosion in pipes decrease their reliability, shelf life and also reduce their functionality.

by Groweladmin -

Role Of Solvents In Paints And Coatings

A solvent is widely used to disperse or dissolve various components that are used in the formulation in coatings and paintings. One can find different types of industrial paints such as organic coatings – alkyd coatings, epoxy coatings, polyurethane coatings and inorganic coatings – acrylic coatings, ceramic coatings, intumescent coatings. Epoxy paints define high performance and large of coating products that pack up with excellent mechanical, film-building and chemical properties also with short drying and curing duration. There are many paint companies in India that provide the best paints which many of the well-known industries and factories use. One can find many types of solvents that are used in paints and coatings namely hydrocarbon solvents, ketones, esters, alcohols and glycol ethers.