by Groweladmin -

How Can Electroplating Be Used To Prevent Corrosion?

As far as the machinery is concerned one has to take proper care of it as there are many threats which are always lurking around it. Any machine or tool is vulnerable to a lot of complexities if one fails to provide regular maintenance to it.

One of the major threat which any metallic machine has to fight is the problem of corrosion. As the machines have to face all the extremities of the weather and fluctuating temperatures, being prone to rust becomes quite obvious and inevitable. If not addressed at the right time, it may cause some severe damage to the machine and eventually hinder the functioning and the productivity of the machine. These machines face a premature degradation if the corrosion takes over. This is why every company or producer should take adequate measures to ensure that the curse of corrosion stays as far as possible away from all the machinery.

by Groweladmin -

How To Ensure Proper Rust Protection During Shipping?

During shipping, the metallic objects can really take a toll because of the adverse conditions which it has to go through. It is certain that during shipping the goods will get damaged.

We try our best to avoid any such damages with all the precautions we take. This can save the goods from most of the damage but we fail to address a vital point which is the real reason behind the major damage to our goods during shipping.

by Groweladmin -

What Are The Differences Between Electroplating And PVD?

Electroplating and PVD both processes are used by industries for coating the parts. PVD is a technology that provides high-quality finishes without damaging the environment. PVD is more environment friendly than electroplating but industries still use electroplating most of the times just because they have been using it since many years. Read differences between electroplating and PVD in this blog :

by Groweladmin -

How Plating on Plastic Compares to Plating on Metal

The plating process for plastic and metal are different and both have different benefits to offer. Plating on plastic creates an impression of higher quality, protects against corrosion and chemical attack, increases strength, gives plastic the ability to conduct electricity. Metal plating protects metal against corrosion, provides better wear resistance, increased solderability, increased strength, decorative quality to metal and help it reduce friction. These benefits give you a clear idea of the importance of plating process for metal and plastics. Read in this blog, comparison of plating on plastics to plating on metal :

by Groweladmin -

What are the significance of Aluminium and copper Wire Drawing Lubricants?

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing dyes. There are various applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. The fundamental reason for using aluminium and copper and copper wire drawing lubricants is to reduce friction and oppose the pick-up and even breakage that otherwise occurs with most metals.

The significance of aluminium and copper wire drawing lubricants are many:

by Groweladmin -

What are the 4 different types of Industrial Paint Coatings?

Paint is very important to keep your instruments looking new and in a good condition. Industrial paint coatings are protective coating that prevents and damage and weathering of the industrial equipments. You should choose a good quality industrial paint supplier in India to help you with good quality paint and suggest the right Industrial paint coating method for your industrial equipment’s.   

The 4 different methods of industrial paint coatings are as mentioned below:  

by Groweladmin -

What is a rust preventive oil used for?

Rust forms on iron when it comes in contact with water or oxygen. It results in equipment failure, increased power consumption, non-salable parts and other problems in an industry. Application of rust preventive oils to the metal parts helps you prevent this corrosive attack and save a significant amount of money for your business. Let’s explore in this blog, what rust preventive oil is used for :

by Groweladmin -

Safety Tips for Handling Industrial Lubricants

Industrial lubricants need to be handled with extra care to avoid deterioration, contamination and costly waste disposal. Working with industrial lubricants is hazardous. You should identify the potential hazards associated with industrial lubricants and take necessary measure to prevent them. Follow below-given safety tips while handling industrial lubricants :

by Groweladmin -

Cleanliness or Quality: Which Is Important For Lubricant?

With the industrial revolution and advent of technology, there are different types of machines and equipment that have evolved.  Specialized lubricants and oil are required for varied industrial applications. The lubricant should be free of any impurities to give its best performance to the machine.   

A lubricant which is free of impurities is a superior and dependable lubricant. The machines have a safe and long life if such quality lubricants are applied to them.