GRODAL SYNCOOL 2 – SURFACE PROTECTOR CUM COOLANT FOR PUMP INDUSTRY

GRODAL SYNCOOL 2 is the “GROWEL” make surface protector cum coolant widely used in Pump Industry for Submersible / Open well / Self Priming Pump-sets. Its primary application is to protect the inner surface of the motor against Rust and Corrosion which increases the working lifespan for the Motor to a long time.

GRODAL SYNCOOL 2:- Major Benefits

1. Due to its well-balanced formulation it reduces the pump set’s choked-up problem with the help of world-class cleaning agent cum rust inhibitor additives. Exhibits excellent performance on cast iron body washing/cleaning & rust protection.

2. Easy start-up even at low voltage due to choking free operation.

3. Increased life of thrust bearing and bushing due to synthetic water- soluble lubricity additives.

4. No pressure generation after using GRODAL SYNCOOL 2 in the pump, resulting in no gas formation into the closed system due to the additives.

5. Our product is chlorine & phenol-free.

6. Increases the overall efficiency, based on specific requirements as 20% dilution with DM water to 100%.

7. Toxicity test carried out NABL approved lab resulting passes.

8. Our product GRODAL SYNCOOL 2 is formulated with top quality water-soluble additives.

9. We strongly recommend this product to use in the pumps Instead of plain water by pump manufacturer to avoid rusting & to boost the overall performance in operation by 5-6%.

How to use GRODAL SYNCOOL 2 in pumps:-

  • First flush & clean the Submersible / Open well / Monoset motor cooling system by soft / Tap water. Fill with one part (1Ltr) “Growel” make Grodal Syncool 2 & 4 parts (4Ltr) of DM water or drinking water in to the motor up to specified / marking level. Then complete the assembly of a motor by tightening the screw with washer & ‘O’ ring. Ensure there is no leakage. Before final installation submersible motor must check (start) for 1-2 minutes. If it starts smoothly then the submersible motor is ready for installation. During this check, GRODAL SYNCOOL 2 develops a synthetic polymer layer inside the motor. This layer protects the inner surface against rust/corrosion.

Advantages of Using GRODAL SYNCOOL 2:

  • Grodal Syncool 2 is beneficial commercially as well as technically.
  • Consumption benefit of our product is as under:
APPLICATION COMPETITOR PRODUCT RATIO GROWEL RATIO
Washing CI Parts of motor with Gun Metal Bush 30 % 20 %
Washing CI Parts of motor with Carbon Bush 30 % 4 %
Washing of Rotor/Stator 30 % 20 %
Coolant filling at testing/dispatch 12.5 % 10 %
    null
  • Grodal Syncool 2 has better performance in terms of Rust Protection compare to competitor’s product
  • We have small packing like 1 Kg, 5 kg & 30 Kgs
  • Overall benefit of 8 to 10 % with GRODAL SYNCOOL 2
Leave a Reply

Your email address will not be published. Required fields are marked *