GrowelSpecializes in the development & manufacture of lubricating oils used in the wire drawing industry.
The Indian Market hitherto was dominated by multinational corporations, Growel drawing oil has developed a made in India range of highly advanced range of products specifically geared for the wire drawing industry.
These wire drawing products are categorized as per the material used for the wire manufacture –
- MS & steel wire drawing oils
- Aluminium wire drawing oils
- Copper tube drawing oils
- Copper wire drawing oils
MS & steel wire drawing oils –
GRODAL NOX UM – Water-soluble lubricating compound for MS & SS wire drawing as well as deep drawing applications.
GRODAL STEEL NOX / NOX –
This is a pasty material based on vegetable oil & surfactants used for steel, MS, black & galvanized wires. In many industries, it is also used for deep drawing purposes.
Aluminium drawing oils –
Growel’s lubricants cover all the aluminum wire production stages:
Rod breakdown (RBD)
Extra-fine wire drawing
Coiling and/or bunching
GRODAL STAMP DE 2010 –
This product is mainly used in vanishing, drawing, stamping & blanking applications.
It is especially suitable for aluminum & its alloys.
GRODAL DRAW 300 –
This is a low viscosity fine aluminum wire drawing oil free from sulphur, chlorine, zinc & is, therefore, suitable for super finishing of ferrous, non-ferrous & yellow metals.
Multifunctional semi-synthetic oil for aluminum or its alloys. This range of drawing oils is specially designed for excellent lubrication, extreme cooling power & better detachment from aluminium.
GRODAL STAR DE 1422 –
40 CST viscosity product -Multifunctional semi-synthetic oil for aluminium or its alloys specific for wire rod breakdown and drawing. Final diameter above 0.6 mm.
GRODAL STAR DE 1422-90-
40 CST viscosity product -Multifunctional semi-synthetic oil for aluminium or its alloys Specific for wire rod breakdown and drawing. Final diameter above 0.4 mm.
GRODAL STAR DE 1422 R-
170 CST viscosity product- Multifunctional semi-synthetic oil for aluminium or its alloys Specific for wire rod breakdown and drawing. Final diameter above 0.9 mm.
GRODAL STAR DE 1422 H-
22 CST viscosity product – Semi-synthetic oil for the drawing of aluminium and its alloys fine-wires (Al/Mg). Exit diameter above 0.5 mm. Corrector additive for GRODAL STAR DE 1422 R and TADAL STAR DE 1422/90.Suitable for enameled aluminium wire drawing.
GRODAL STAR DE 1422 F-
12 CST viscosity product – Semi-synthetic oil specially designed for the drawing of aluminium fine-wires. Suitable for the production of enameled wire. Exit diameter below 0.5 mm. Corrector additive for GRODAL STAR DE 1422 and GRODAL STAR DE 1422/90.
COPPER TUBE DRAWING OIL –
GRODAL TUB 3000 –
This is a synthetic oil specially designed for drawing copper pipes. This product is also suitable for inner drawing & is free from mineral oils, sulphur & chlorinated esters.
GRODAL TUB M 01F-
A synthetic oil suitable for inner copper tube drawing.
GRODAL FIL C-14-
Light viscosity stranding oil for aluminium & copper. This product has a high cooling ability.
COPPER WIRE DRAWING & ANTI TARNISH FLUIDS
GRODAL CU 860 & GRODAL CU 661 –
These products are added to water to prevent tarnish & oxidation on copper tubs, wires, rods, etc.
GRODAL CU SYN DRAW 12 –
An all synthetic product with lubricity, corrosion inhibitors & surfactants. This product is free from binding, enameled wire rejections, oil separation & insoluble copper soap formation.
GRODAL CU 1350 N –
Multipurpose emulsionable semi-synthetic oil for copper and enameled copper wire. High stability and high detergency. It provides high benefits with low maintenance costs. Suitable for an enameled wire.
Wire type Concentration % volume
Rod 12 -18
Intermediates 4 – 10
Fine 3 – 5
Annealing 1 – 1.5 max