Anodising
I-Fin AL SC 53
Non-caustic, non-silicate based high efficiency non- eatching type cleaner for Aluminum.
I-Fin ALETCH 724
Caustic based cleaner for chemical etching.
I-Fin ALETCH 170
Etchant to attain satin finish.
I-Fin AL E 10 / 11
Acidic Etchant to obtain micro - roughening prior to Anodizing.
I-Fin AL Antiprecipitation Additive
It prevents precipitation in alkaline/acidic etchant.
I-Fin AL Smoothening Agent
This alkaline etchant provides smooth & uniform surface.
I-Fin AL ETCH Fume Suppressant
It creates a compact foam layer during etching to avoid fuming.
I-Fin AL Chemical Brightener
Used as electrochemical polishing process to improve basic gloss of substrate.
I-Fin AL Fume Suppressant
Used in Anodising bath to create a foam layer on top surface during Anodising of Aluminium parts.
I-Fin AL Bronze Sn / I-Fin Al Bronze Sn Salt/ I Fin Al Bronze Colour Salt G / Gold / Blue / Red / Silver
This product provides uniform dispersion along with very high penetration ability of dyes to Anodised articles. It contains combination of antioxidising and complexing substances with excellent penetrating effect. It provides a colored coat varying from i) light Bronze to dark Bronze, finally jet-black ii) Gold or light Brass iii) blue iv) light red to black v) Silver.
I-Fin AL Cold Sealing Salt / 35 / 38 / 39 / 39 B/ ES
i-Fin AL Cold sealing process contains reactive substances, which seals the coat and produces a protective film having low reactivity to weathering. Cold sealing products are not being decolorized than most of the immersion colorants.
I-Fin AL Hot Sealing Liquid 36 / 37 / Aluseal
Hot sealing liquid additives are developed for Anodised Aluminium parts with no loss on coloured surface. It offers high anti smutting effect without sacrificing seal quality.
Hexavalent
Hexavalent Ginthox AL 990 / I-Fin AL Chromating / Phosphochrome
The liquid product is for yellow and green conversion chromating process, used on Aluminium and its alloys for producing a wide range of finish on surface; also serving as final finish for resistance against corrosion/decorative purposes.
Trivalent
Trivalent I-Fin AL TC 2801
This liquid product is for trivalent chromating for Aluminium & its alloys, produces wide variety of finish on surface.
I-Fin AL Yellow / Green / Pink / Brown / Magenta / Blue / Red / Black
Wide Range of dip colouring dyes which pass over 8-9 cycle of UV or Sunlight.
DISCLAIMER :
Our recommendations are made in good faith and are based on our skills. However
, since the conditions of use of these product
s are beyond our
control, this information is given on the express condition and agreement that
Grauer & Weil (India) Limited, will not be liable to any person by reason thereof. Nothing herein shall be deemed to be a recommendation to use
any product in violation of any existing patent rights.